Lamotte FORMALDEHYDE IN AIR TEST KIT Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Équipement Lamotte FORMALDEHYDE IN AIR TEST KIT. LaMotte FORMALDEHYDE IN AIR TEST KIT User Manual Manuel d'utilisatio

  • Télécharger
  • Ajouter à mon manuel
  • Imprimer
  • Page
    / 2
  • Table des matières
  • MARQUE LIVRES
  • Noté. / 5. Basé sur avis des utilisateurs
Vue de la page 0
FORM AL DE HYDE IN AIR TEST KIT
CODE 6695
QUANTITY CONTENTS CODE
2 x 120 mL *Formaldehyde Reagent #1 *6697-J
5g *Formaldehyde Reagent #2 *6698-C
100 mL *Formaldehyde Reagent #3 *6699-J
250 mL Distilled Water 5175PT-K
2 Test Tubes, 10 mL, glass, w/cap 0843
1 Test Tube, 12.5 mL, plastic, w/cap 1163
2 Pipets, 1 mL, plastic 0354
1 Spoon, 0.05 g, plastic 0696
1 Formaldehyde In Air Comparator 6696
*WARNING: Reagents marked with an * are considered to be potential health
hazards. To view or print a Material Safety Data Sheet (MSDS) for these reagents
go to www.lamotte.com. To obtain a printed copy, contact LaMotte by e-mail,
phone or fax.
To order individual reagents or test kit components, use the specified code
number.
To determine if there are any interferences present in the reagents follow
the procedure below, eliminating Steps 2 & 3. If the amount of color
which develops in the reagent blank is greater than zero, subtract this value
from the test results for the actual concentration of formaldehyde.
PRO CE DURE
1. Fill a clean impinging tube (0933) to the 10 mL line with Distilled
Water (5175PT).
2. Connect BD Pump (1949) to Midget Impinger.
NOTE: Make sure the long tube is immersed in the absorbing solution.
3. Adjust flowmeter to collect air at a rate of 1.0 Lpm. Sample 30
minutes, or until a measurable amount of formaldehyde is absorbed.
4. At end of sampling period, disconnect impinger and pour contents into
clean 10 mL test tube (0843). Dilute to mark if necessary with distilled
water (5175PT) to replace any liquid lost through evaporation.
5. Carefully pour 12.5 mL of *Formaldehyde Reagent #1 (6697) into the
12.5 mL test tube (1163). Use the 0.05 g spoon (0696) to add 0.05 g of
*Formaldehyde Reagent #2 (6698). Cap and mix until powder
dissolves. This mixed reagent is stable for one day only.
CAUTION: *Formaldehyde Reagent #1 is highly poisonous. Read
MSDS before use.
6. Use a 1 mL pipet (0354) to add 1.0 mL of reagent from Step 5 to the
contents of the 10 mL test tube (0843). Cap and mix.
7. Use a second pipet to add 1.0 mL of *Formaldehyde Reagent #3
(6699). Cap and mix. Wait 20 minutes.
8. Insert test tube into Formaldehyde In Air Comparator (6696). Match
sample color to index of color standard. Record the index number.
9. Use the chart below to convert index reading to a concentration.
Record as ppm Formaldehyde.
FORMALDEHYDE IN AIR CALIBRATION CHART**
TIME COMPARATOR INDEX NUMBER
(min) 1 2 3 4 5 6 7 8
15 0 0.26 0.54 1.07 2.14 3.20 4.26 5.34
30 0 0.13 0.27 0.54 1.07 1.60 2.13 2.67
60 0 0.07 0.14 0.27 0.54 0.80 1.07 1.34
120 0 0.03 0.07 0.13 0.27 0.40 0.54 0.67
**values in ppm
NOTES:
1. The sampling period specified in the directions corresponds to
concentration which may be encountered in ambient air conditions.
High concentrations of pollutants in the atmosphere will require
shorter sampling periods, while low concentrations will require longer
sampling periods.
2. For applications requiring a high degree of accuracy, an external
flowmeter should be used to verify the flow under actual working
conditions. LaMotte Company can provide certification of the BD
Pump’s flow rate for a modest additional expense.
LaMOTTE COM PANY
Helping People Solve Analytical Challenges
SM
PO Box 329 • Chestertown • Maryland • 21620 • USA
800-344-3100 • 410-778-3100 (Out side U.S.A.) • Fax 410-778-6394
Visit our website at www.lamotte.com
12.10
Vue de la page 0
1 2

Résumé du contenu

Page 1 - LaMOTTE COM PANY

FORM AL DE HYDE IN AIR TEST KITCODE 6695QUANTITY CONTENTS CODE2 x 120 mL *Formaldehyde Reagent #1 *6697-J5g *Formaldehyde Reagent #2 *6698-C100 mL *Fo

Page 2

FORM AL DE HYDE IN AIR TEST KITCODE 6695QUANTITY CONTENTS CODE2 x 120 mL *Formaldehyde Reagent #1 *6697-J5g *Formaldehyde Reagent #2 *6698-C100 mL *Fo

Commentaires sur ces manuels

Pas de commentaire